What is the difference between SPORTEYFLOR standard and cushion systems?

The standard system (primer + basecoat + topcoat) gives a firm surface suitable for casual and club play. The cushion system adds an intermediate cushion layer that reduces impact on players' joints — used for professional courts and facilities where players train daily.

Can SPORTEYFLOR be applied over existing damaged courts?

Yes, if the existing surface is structurally sound. Clean, repair cracks, apply SPORTEYFLOR PRIMER and proceed. Severely damaged or delaminating courts need full removal first.

What colours are available for tennis and basketball courts?

SPORTEYFLOR TOPCOAT is available in standard court colours: red, green, blue, and terracotta for tennis; maple/wood grain effect for basketball; and custom colours on request.

How long before the court is ready for play after installation?

Light foot traffic after 24 hours. Full play after 72 hours (3 days) from final topcoat. Do not drag heavy equipment or use machinery on the surface before 7 days.

Sports Court Flooring — Tennis, Basketball, Badminton

The Problem: Most Outdoor Courts Fail in 3 Years

A Cracked, Faded Court Damages the Game — and Damages Players

Uneven bounce from cracks causes wrong muscle memory. Slippery surfaces from UV-degraded coatings cause injuries. Faded lines cause disputes. A court that isn't maintained costs more in replacement than a properly built system.

Why Courts Fail Early

No primer coat — Acrylic coatings applied directly to concrete peel within 12–18 months.
Wrong number of coats — Single-coat applications thin out under UV. Minimum 2 coats of basecoat + 2 coats of topcoat.
Concrete not cured before coating — Applying to green concrete (less than 28 days) causes immediate adhesion failure.
No texture layer — Without basecoat texture, ball response is inconsistent and surface becomes slippery when wet.

The SPORTEYFLOR System

A 4-layer acrylic system — each layer has a specific performance function. Skip one and the system underperforms. Follow the system and you get a court that plays consistently for 8+ years.

SPORTEYFLOR Standard System

Layer 1 — PRIMER
Acrylic primer · 0.15–0.20 kg/m² · Cure: 12–16 hrs
Function: Adhesion to concrete

↓

Layer 2+3 — BASECOAT (2 coats)
Textured acrylic · 0.40–0.60 kg/m² per coat · Cure: 8 hrs between
Function: Ball response texture + levelling

↓ (optional)

CUSHION LAYER (optional, professional)
Shock-absorbing acrylic · 0.50–0.80 kg/m² · For professional/daily use courts
Function: Reduces joint stress on players

↓

Layer 4+5 — TOPCOAT (2 coats)
Colour acrylic finish · 0.30–0.45 kg/m² per coat · UV resistant
Function: Playing surface + colour + UV protection

↓

LINE MARKING
SPORTEYFLOR LINE paint · White/yellow · Applied with tape and roller
Function: Court demarcation per ITF/ITTF standards

Property	SPORTEYFLOR Standard	SPORTEYFLOR Cushion	Cement Paint
Ball bounce consistency	✓ High	✓ High	✗ Variable
Slip resistance (wet)	✓ Good	✓ Good	✗ Slippery
Joint protection	Standard	✓ Enhanced	✗ None
UV resistance	✓ Yes	✓ Yes	✗ Fades fast
System life	8–10 years	8–10 years	2–3 years

Product Specifications

SPORTEYFLOR PRIMER

0.15–0.20

kg/m² coverage

12–16

hours cure time

1

coat required

Acrylic

water-based

SPORTEYFLOR BASECOAT

0.40–0.60

kg/m² per coat

2

coats required

8

hours between coats

Sand

texture finish

SPORTEYFLOR TOPCOAT

0.30–0.45

kg/m² per coat

2

coats required

8–12

hours between coats

UV

resistant formulation

Application Timeline — Tennis Court

Day 1

Surface Preparation

Concrete must be minimum 28 days old. Grind, remove contaminants, fill cracks. Surface flatness: 3 mm over 3 m maximum.

⏱ Full day · Critical foundation step

Day 2

PRIMER Application

Apply single coat SPORTEYFLOR PRIMER. Even coverage across full court. No bare patches.

⏱ 3–4 hrs · Cure: 12–16 hrs overnight

Day 3

BASECOAT — Coat 1

Apply first basecoat. This creates the sand texture for ball response. Consistent coverage.

⏱ 4–6 hrs · Cure: 8 hrs

Day 3–4

BASECOAT — Coat 2

Second basecoat perpendicular to first. Court now has full texture and levelling.

⏱ 4–6 hrs · Cure: 12 hrs

Day 4–5

TOPCOAT — 2 Coats

Apply sport colour topcoat. Two coats for uniform colour and UV protection.

⏱ 4–5 hrs per coat · Cure: 8–12 hrs between

Day 5–6

✓ Line Marking + Ready for Play

Apply LINE paint for court markings. Allow 24 hours, then court is ready for play.

Total: 5–6 days from prep to play

Frequently Asked Questions

Standard vs cushion system — which should I choose?

Standard for recreational courts, school courts, and low-frequency use. Cushion for club facilities, academies, and anywhere players train daily. The cushion layer significantly reduces long-term joint injury risk.

Can I apply SPORTEYFLOR over an existing acrylic court?

Yes, if the existing surface is well-bonded. Clean thoroughly, sand loose edges, apply SPORTEYFLOR PRIMER and proceed. If existing surface is peeling or delaminating, remove completely before applying new system.

What colours are available?

Standard colours: red, green, blue, terracotta for tennis; blue and red for badminton; custom colours on request. Line marking paint is available in white and yellow.

How do I maintain a SPORTEYFLOR court?

Sweep regularly. Wash with mild detergent and water annually. Reapply topcoat only (no need to redo full system) every 4–5 years to maintain colour and UV protection.

Sports Court Flooring Systems